• 목록
• 게시판 리스트 옵션
  • 수정
  • 삭제

Ghost Immobiliser Installation

Protect your pride & joy from car thieves by putting in an immobiliser ghost. Our TASSA confirmed system safeguards vehicles from hacking, key cloning and immobiliser bypassing.

The system is hidden in the wiring loom of your vehicle, making it totally invisible to anyone who is looking. It is operated by creating pin code push sequences that are activated by buttons already present on the steering wheel, door cards and centre console.

No circuit cuts

It's not surprising that car owners want to protect the vehicle they've worked so hard to buy. However, traditional security devices like wheel locks and alarms can easily be cut off or jumped by thieves. ghost immobilisers; see this page, however is a highly efficient solution that is silent and is not easily detected by modern thieves.

Ghost immobilisers are hidden device that connects to the CAN data network in your vehicle to disable the engine, without the use of radio frequencies or key fobs. It communicates with the vehicle's ECU through existing buttons on the steering wheel, dash, and door panels to generate a unique pin code that you only are aware of. The code can be changed at any time and can contain up to 20 numbers based on your preference. It comes with an emergency code that you could use in the event of forgetting your PIN.

The ghost immobiliser is helpful to prevent the relay box at your home from transferring the signal of your car key, which would open the doors and begin your vehicle. It also blocks advanced methods of stealing your vehicle, like OBD port hacking. The device is small, weatherproof and hard to see. It's also hard to tamper.

The ghost immobiliser has another advantage: it is able to be inserted into your vehicle without leaving any permanent marks. It is ideal for people who plan to sell their car in the near future. It's also more efficient and less time-consuming to install than an original factory-fitted system.

The Autowatch ghost ii immobiliser is a revolutionary next-generation device that blocks theft of cars using contactless technology by connecting to the vehicle's CAN data network and using the existing buttons to create a unique PIN code. It is a discreet device that is installed with no wires cut and does not require additional key fobs. It also connects to the vehicle's original ECU to prevent thieves from bypassing it by using new keys or replacing the ECU with an "relay". This system is TASSA certified and can be linked to an International Security Register, allowing owners peace of mind knowing their vehicles are protected against theft.

No scanning with RF

You'll want to secure your vehicle from theft if have spent lots of money and spent a lot of time customizing it. One way to do this is by installing an immobiliser. This will prevent the engine from starting until you enter a unique PIN code. You can generate a 20-digit code by pressing the buttons on your dashboard and steering wheel. This will ensure that only you have the right to drive your vehicle. It is also possible to create a service and valet mode, which allows you to start your car temporarily without entering the PIN code. This will permit technicians to work on your vehicle, without being present. This is a great option for people who want to reduce time and simplify their lives.

Ghost immobilisers are new generation device that connects to your vehicles CAN data network and utilizes the buttons on the dashboard and steering wheel to program a personal PIN code. It is designed to blend into with the rest of your vehicle, since it doesn't emit any sound or LED indicators. It can be placed anywhere on your vehicle, without impacting the appearance of your vehicle.

This stealthy system is TASSA approved and can cut down on your insurance costs. It also has a tracking function that can track your vehicle even if it has been stolen. This is helpful if you own a unique or expensive vehicle that you've invested many hours making it your own.

The Autowatch Ghost can be used in conjunction with an iPhone app to enable you to start your vehicle remotely in the event that you forgot your PIN or not able to enter the vehicle for some reason. This feature is perfect for when you have to pick up the kids or ghost immobilisers go on errands, but don't want someone else driving your vehicle. It can also be helpful in the event that you need to bring your vehicle in for servicing or repair.

The Ghost has the advantage that it doesn't transmit or detect radio frequencies, so it is undetectable by thieves who use RF scanning and code grabbing technology. It also shields your vehicle from key cloning, ECU swapping and other typical methods of theft.

No key cloning

Ghost immobilisers are a fantastic option for protecting high-end vehicles and are designed to stop key cloning. They stop your car from starting unless an additional PIN code is entered alongside the standard key fob. This makes it difficult for thieves to steal the vehicle, and can stop them from trying. This is a particularly good idea if you've spent lots of time and money making your vehicle unique or have a unique or expensive model.

These immobilisers connect to the vehicle's CAN data network and are completely hidden which means there is no indication of its presence within the vehicle. It is also impossible for a burglar to detect the device by using radio frequency scanning or code technology for grabbing. This means a thief would need to wait longer to steal your vehicle.

A criminal will need to be aware of the pin code and the exact location of the ghost to bypass it. However, the pin code will be specific to you and may be altered as many times as you like. The pin you select is easy to remember but mathematically impossible for anyone else to understand. The engineer will also have provided an emergency pin number in the event that you forget the pin.

The Ghost CAN bus immobiliser is weatherproof and easily installed in any area of your vehicle. It works with all vehicles and fully customisable to match the look of your vehicle. It is also extremely affordable and easy to use. The device can be transferred to a different vehicle, if it is compatible with the new vehicle.

The CAN bus can be used with other security features. For instance, it can detect damage to your vehicle and notify the owner. It also can shut down the engine if the car is damaged. The system can also protect your vehicle from hacking and key cloning. It can also detect vibrations and contact with the vehicle. It can also alert the owner when the vehicle is moving.

No OBD port hacking

Ghost is an immobiliser that is hidden and connected to the CAN data network in your vehicle which prevents a thief from gaining access to your vehicle to disable the alarm, deactivate the key fob and code new keys. This technology is a major improvement on traditional methods employed by thieves in the past to take your vehicle. The CAN data network means that the system will not be affected by disconnecting or replacing your battery.

The Autowatch Ghost 2 immobiliser is the first immobiliser for CAN bus aftermarkets worldwide, safeguards against key-cloning, hacking and replica car theft. It doesn't use LED indicators or key fobs. Instead, it uses the buttons on your steering wheel, console, and door panels.

Modern thieves are able to utilize diagnostics to identify circuit breaks in your vehicle. They can bypass immobilisers which require a large amount of wiring or are integrated in the wiring. The Ghost is weatherproof, doesn't require additional wiring and cannot be identified by diagnostic tools that are professional. It can even be installed on vehicles with anti-theft equipment.

A Ghost immobiliser also has a significant benefit: your car can only be started by someone who knows your PIN code and has physical access to your vehicle. This is a big benefit over traditional security systems which are able to be bypassed using cable alteration, a screwdriver or the utilisation of a universal remote controller.

You can easily reset your PIN in case you forget it by using the emergency PIN override feature on your mobile or computer. This is useful if you want to start your vehicle after it has been left in a garage, ghost Immobilisers or by using the valet parking service.

The Autowatch Ghost 2 is the most recent version of the product and is approved for insurance by TASSA when installed by one of our authorized installers. It comes with a QR fingerprint system to identify specific parts, which allows for the return of stolen items if they are found. It can also be switched to'service mode,' which allows the engine to be started when your vehicle is in a garage or with valet parking, however, you'll need to enter your PIN code once more to exit the vehicle.